Canon S450 User Manual page 354

I Application error, general protection fault
Check 1
A
RE YOU USING A
Attempting to print from a Windows 3.1 application program installed on a
system with Windows 98 or Windows 95 may cause an error. Use a
Windows 98 or Windows 95 compatible application program.
You cannot use the Canon S450 with the Windows 3.1 operating system.
Note
Check 2
A
RE SEVERAL APPLICATION PROGRAMS RUNNING IN THE
BACKGROUND
If you are running several application programs at the same time, there may
not be enough memory available for the print job.
Quit the other application programs and try again.
Check 3
D
OES THE COMPUTER HAVE SUFFICIENT MEMORY
Make sure that you have the required amount of memory installed for the
application program you are using to print.
For details, refer to the documentation for your application program.
If the amount of memory is insufficient, install more memory.
W
INDOWS
?
Checking the Windows version and memory capacity
Windows
3.1
APPLICATION PROGRAM
An Error Message Appears
?
?
Troubleshooting 354