Specify the basic settings.
3
• Click the down-arrow on the right of the Paper Size box and select the
• Select the most appropriate scanning mode for the image you wish to
Load the image you wish to scan in the auto sheet feeder of the printer and
4
click the Prescan button.
Note
It's a good idea to use prescanning to determine whether or not an image
can be scanned properly or to test the effects of image adjustments. If the
image is slanted or a portion of the image is cut off in the preview area, click
the Clear button. Load the image correctly and click the Prescan button
again.
To scan only a portion of the image, you can drag the mouse to specify the
5
portion. The specified portion is called a Selection Box and only the area in
the Selection Box will be scanned. To specify the Selection Box:
• Point to a corner of the rectangular area of the image that you want to
• Drag the mouse to the opposite corner of the rectangle.
most appropriate paper size for the image you wish to scan.
scan in the Scanning Mode box.
Changing the Scanning Mode
select.
Using the Scanner With Windows
Using IS Scan
401