Table of Contents
Advertisement
When a confirmation message appears, make sure that the printer is
3
turned on and then click the OK button.
Print head cleaning begins. (It takes about two minutes to complete print
head cleaning and the POWER light stops flashing.)
Print a Nozzle Check Pattern to confirm the success of deep print head
4
cleaning.
If the cleaning had no effect, perform normal print head cleaning and deep
Note
print head cleaning again. After cleaning the print heads several times, if
the Nozzle Check Pattern is not satisfactory, a print head may be worn out
and the corresponding BJ cartridge must be replaced.
Printing a Nozzle Check Pattern
Replacing a BJ Cartridge
Using Maintenance Functions
Using the Windows 98/95 Printer Driver
180
Advertisement
Table of Contents
