Table of Contents
Advertisement
Macintosh
Select the most appropriate icon that indicates the print mode in the Printer
Properties dialog box. Specify the media type (Transparency), and the
BJ cartridge installed in the printer.
Start the print job.
5
6
Remove each printed transparency as it is ejected from the printer.
Do not touch the printed side until the ink is completely dry. About 15
minutes are required for drying.
• After drying, cover each transparency with one sheet of plain paper
Note
(uncoated) to prevent sticking and abrasion. Also, cover each
transparency if you are storing them in plastic pockets to prevent the
transparencies from sticking to the plastic.
• Store unused transparencies in the original package in a dry, cool
location away from direct sunlight, high temperature, and high humidity.
Using the Macintosh Printer Driver
Printing on Special Media Types
Paper Handling
84
Advertisement
Table of Contents
