Table of Contents
Advertisement
Macintosh
Select the most appropriate icon that indicates the print mode in the Printer
Properties dialog box. Specify the media type (Back Print Film), and the
BJ cartridge installed in the printer.
5
Start the print job.
6
Remove each printed sheet of Back Print Film as it is ejected from the
printer.
Do not touch the printed side until the ink is completely dry. About 15
minutes are required for drying.
Note
• An image is reversed when printed on Back Print Film in order to display
correctly when lit with a backlight.
• After drying, cover each sheet of Back Print Film with one sheet of plain
paper (uncoated) to prevent sticking and abrasion. Also, cover each
sheet of Back Print Film if you are storing them in plastic pockets to
prevent the film from sticking to the plastic.
• Store unused film in the original package in a dry, cool location away
from direct sunlight, high temperature, and high humidity.
Using the Macintosh Printer Driver
Printing on Special Media Types
Paper Handling
53
Advertisement
Table of Contents
