Canon S450 User Manual page 112

I Closing the Printer Properties Dialog Box
After specifying the necessary print settings, close the Printer Properties dialog box and
start your print job.
1 Make sure that the information on Direction, Feed, and Paper Thickness
Lever in the illustrated guideline is correct.
Click the OK button. The print settings become enabled and the Printer
2
Properties dialog box closes.
Note • When you want to enable the print settings without closing the Printer
Properties dialog box, click the Apply button.
• When you do not want to enable the print settings, click the Cancel
button.
• When you want to revert the print settings to the factory settings, click
the Defaults button in each tab.
Getting to Know the Windows 98/95 Printer Driver
Using the Windows 98/95 Printer Driver 112