Getting The Ink Level Information; Knowing When To Replace Ink Tank - Canon PIXMA MP950 User Manual

Getting the Ink Level Information

You can check the ink tank status by the ink tank lamp display. Open the Scanning Unit (Printer
Cover) of the machine and check the ink tank lamp.
When the ink level is low:
The ink tank lamp flashes slowly (about three seconds). Prepare a new ink tank.
When ink has run out:
The ink tank lamp flashes fast (about one second). Replace it with a new ink tank.
If an error message is displayed on the LCD, an ink tank error has occurred and the machine cannot
continue to print. See

Knowing When to Replace Ink Tank

It is important to identify the empty tank using the LCD and replace it.
When Low Ink is Detected:
The message is displayed on the LCD when you start printing.
Obtain a new ink tank.
To continue printing, select <Yes> and then press [OK].
To cancel printing, select <No> and then press [OK].
When Ink has Run Out:
Press [OK] to resume printing with an empty ink tank. When printing is finished, replace the ink
tank immediately. If you continue printing with an empty ink tank, it will be a cause of trouble.
* Printing does not resume if any of the ink tanks are left uninstalled. Be sure to press [OK] with
all the ink tanks installed.
Press [Stop/Reset] to cancel printing. Replace with a new ink tank.
Chapter 11
...Repeats
...Repeats
"An Error Message is Displayed on the LCD" on page
is displayed.
is displayed.
115.
Routine Maintenance 97