Cleaning Your Machine - Canon PIXMA MP950 User Manual

Note

Cleaning Your Machine

This section describes the necessary cleaning procedures for your machine.
Caution
Cleaning the Platen Glass and Document Cover
Wipe the Platen Glass (A), the FAU Protective Sheet (white area) (B), and the FAU Lamp (C)
with a clean, soft, lint-free cloth moistened with water. Then wipe with a clean, soft, dry, lint-free
cloth making sure not to leave any residue, especially on the Platen Glass. If you have trouble
getting the scanning area clean, wipe with diluted mild detergent (for dish washing).
Important
(B)
(A)
Chapter 11
The pattern is printed in black and blue.
When Automatic Print Head Alignment Cannot Be Executed
Correctly
When automatic Print Head alignment cannot be executed correctly,
the message "Auto head align has failed." is displayed on the LCD.
See "An Error Message is Displayed on the LCD" on page
Be sure to turn OFF the power and disconnect the power cord before
cleaning the machine.
Do not use tissue paper, paper towels, or similar materials for cleaning. Paper
tissue powders or fine threads may remain inside the machine and cause
problems such as a blocked Print Head and poor printing results. Use a soft
cloth to avoid scratching the components.
Never use volatile liquids such as thinners, benzene, acetone, or any other
chemical cleaner to clean the machine; these can damage the machine's
components.
The sheet (B) is easily damaged, so wipe it gently.
Routine Maintenance
115.
(C)
109