Replacing An Ink Tank; Getting The Ink Level Information - Canon PIXMA iP6600D Series Quick Start Manual

Replacing an Ink Tank
CLI-8PC
CLI-8C
CLI-8BK
Replace ink tank(s) if they are out of ink. When replacing them, check the model numbers and
their installation positions.
With this printer, ink tanks must be installed from the right in the order indicated below.
Black:
ml8l.
Cyan: PhotoCyan:
CLI-8BK . . CLI-8C CLI-8PC
PhotoMagenta:
Cll-8PM
CLI-8PM
Magenta:
Cll-8M
CLI-8M
Yellow:
Cll-8Y
CLI-8Y
WNotes •
Be sure to install the ink thanks in the correct order. The proper arrangement
from the left is Black, Cyan, Photo Cyan, Photo Magenta, Magenta, Yellow.
• Should missing characters or white streaks appear despite sufficient ink
levels, see "When Printing Becomes Faint or Colors are Incorrect" on
page 54.
Getting the Ink level Information
You can confirm the ink level in each ink tank through the ink tank lamps. Open the cover of the
printer to see how the ink tank lamps light or flash.
Ink is low:
.....Repeat
The ink tank lamp flashes slowly (at about three second interval). Prepare a new ink tank.
Ink is out:
.....Repeat
The ink tank lamp flashes quickly (at about one second interval), Replace the ink tank with a new
one.
50