Canon PIXMA MP950 User Manual page 112

Cleaning the Roller (Roller Cleaning)
Clean the paper feed rollers if paper is not fed properly. Cleaning the paper feed rollers will wear
the rollers, so perform this only when necessary.
Note
1
Press [ON/OFF] to turn on the machine, then remove any paper from the Auto
Sheet Feeder and Cassette.
See "Turning on the Machine" on page
2
Use [Feed Switch] to select the paper source to clean.
3
Clean the paper feed rollers.
(1) Display the Maintenance screen.
See "Performing Maintenance" on page
(2) Use [ ] or [ ] to select <Roller cleaning>, then press [OK].
The confirmation screen is displayed.
(3) Use [ ] or [ ] to select <Yes>, then press [OK].
The paper feed rollers are cleaned.
4
Repeat step 3 twice.
5
Load three or more of A4- or Letter-sized paper in the paper source you selected in
step 2.
6
Repeat step 3 three times.
The sheet of paper is automatically fed in and then out of the machine.
If there are no signs of improvement after performing three times, contact the Canon
Customer Care Center.
110 Routine Maintenance
Ensure that the Inner Cover is closed.
17.
(2)
(3)
103.
Chapter 11