Other Settings; Language Selection; Reset Setting; Save Settings - Canon PIXMA MP950 User Manual

Other Settings

Date display
Changes the display order for shooting dates to be printed.
Note
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Power save setting
Specifies the time until Power saving is enabled.
You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set
to <1 hour>.
Slide show setting
Specifies the image display quality of the slide show.
Note

Language selection

Changes the language for LCD messages.

Reset setting

You can change the settings back to the default, except for the language for LCD messages and the
position of the Print Head.

Save settings

Saves the settings for the Settings screen.

Load settings

Loads the settings for the Settings screen that were saved.
Chapter 10
When <Print date only> or <Print date & file no.> is selected for <Date/
file no.> in the tab 1 on the Settings (Memory Card) screen, the
shooting date is printed in the date display order you selected. For
Print settings, see
The shooting date format is as specified in the DPOF setting from
DPOF printing.
If you set this setting to <Read/write mode>, card direct printing cannot be
done. After you finish operation of the memory card dedicated drive, be
sure to revert this setting to <Read-only mode>.
When <Image quality: Std> is selected, images are displayed at 5-second
intervals. When <Image quality: High> is selected, images are displayed
at different time intervals according to their resolutions.
"To Change Print Settings" on page
Changing the Machine Settings
34.
95