Cannot Print Properly Through Wireless Communication - Canon PIXMA MP950 User Manual

Error Message On Camera
Printer error
*1
To resume printing, you can press [OK] on the machine instead of selecting Continue.
Cannot Print Properly through Wireless
Communication
The following are the causes of the trouble may occur when printing through infrared
communication.
For the trouble when printing through Bluetooth communication, refer to the Bluetooth User's Guide.
Cause
The installation place, distance,
and/or angle is improper.
During infrared communication,
infrared rays were interrupted or
another infrared communication
device is operating nearby.
The version of the infrared
communication port being used is
not compatible with IrDA.
Chapter 12
An error requiring servicing might have occurred.
Disconnect the cable between the machine and the camera, turn off the
machine, and unplug the power cord of the machine from the power supply.
After a while, plug the power cord of the machine back in, turn on the
machine, and then reconnect the camera to the machine. If the same error
occurs, contact the Canon Customer Care Center.
When printing through infrared communication, confirm that the infrared
communication ports on both the machine and the mobile phone are placed
to face each other at the proper angle and distance, and that there is
nothing to block the communication between them, and then try printing
again. The proper distance and angle for communication vary depending
on the specifications of your mobile phone and on external environment.
Place the machine within 7.87" / 20 cm from the mobile phone for proper
communication.
If infrared communication between the infrared ports of the machine and
the mobile phone is interrupted by any obstacle for ten and several
seconds or longer during printing, the paper on which data is being printed
is ejected and the machine is reset. Remove the obstacle and retry printing.
If an infrared communication device is operating nearby, interference can
occur and fail in printing the document to the end. While printing a
document through infrared communication, do not operate another infrared
communication device, such as a remote controller of a TV, nearby.
The infrared communication function of the machine is only compatible
with mobile phones with IrDA compliant infrared communication ports.
Printing through infrared communication cannot be performed by any other
types of mobile phones.
Action
Action
Troubleshooting 133