Error No.: 1700 Is Displayed; Error No.: 1851 Is Displayed; Error No.: 1856 Is Displayed; Error No.: 2001 Is Displayed - Canon PIXMA MP950 User Manual

Error No.: 1700 is Displayed

Cause
The waste ink absorber is almost
full.

Error No.: 1851 is Displayed

Cause
Inner Cover is open when starting
regular printing.

Error No.: 1856 is Displayed

Cause
During regular printing, Inner Cover
is opened.

Error No.: 2001 is Displayed

Cause
A specified period of time has
elapsed without receiving a
response from the digital camera./
The digital camera or digital video
camcorder connected is not
compatible with this machine.
144 Troubleshooting
Ink used for cleaning is absorbed in a waste ink absorber placed in the
machine.
Press [OK] to cancel the error so that you can continue printing. Once the
waste ink absorber becomes completely full, printing cannot be done until
the waste ink absorber is replaced.
Canon recommends to contact the Canon Customer Care Center as soon
as possible.
Close Inner Cover, then press [OK] on the machine.
Close Inner Cover, press [OK] on the machine, then try printing again.
One page of the print data being sent at the time of the error will be
erased, so print that page again.
Disconnect the camera cable and reconnect it.
Depending on the model or brand of your device, you may have to select a
print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually
after connecting the device to the machine. Unplug the connecting cable
and clear the error. Perform necessary operations for connection referring
to the instruction manual supplied with the PictBridge compliant device,
and then connect the cable again.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
machine. Use a digital camera or digital video camcorder compatible with
this machine.
Action
Action
Action
Action
Chapter 12