Reducing Or Enlarging A Copy - Canon PIXMA MP950 User Manual

Reducing or Enlarging a Copy

You can reduce or enlarge copies.
1
Prepare for copying.
See "Prepare for copying." on page
2
Select the reduction/enlargement method.
The example below assumes that you will select <Zoom (25-400%)>.
(1) Press [Settings].
(2) Use [ ] or [
(3) Use [ ] or [ ] to select <Magnification>, and use [
400%)>.
Specify the custom copy ratio for reducing or enlarging copies.
Besides <Zoom (25-400%)>, you can also choose from the following reduction/
enlargement methods.
Same magnification: Copies in the same size as an original.
Preset ratio:
Fit-to-page:
(4) Press [ ] to move the cursor down, and use [
Holding down [
Note
3
Finalize your selection.
(1) Press [Settings].
Return to the Copy standby screen.
4
Start copying.
See "Start copying." on page
Chapter 2
38.
] to select Tab 1.
(3)
Preset ratios are convenient when changing between standard page
sizes, for example, when reducing A4 to A5, or enlarging B5 to A4.
You can automatically reduce or enlarge the document to fit the size of
the paper which are loaded in the Auto Sheet Feeder or Cassette.
] or [ ] steps through the values faster.
When you choose <Fit-to-page>, the document size may not be detected
correctly depending on the document. In that case, choose <Same
magnification>, <Preset ratio> or <Zoom (25-400%)>.
38.
] or [ ] to select <Zoom (25-
] or [ ] to select the setting value.
Copying 39