Cannot Print Properly Through Wireless Communication - Canon iP6220D - PIXMA Color Inkjet Printer Direct Printing Manual

Cannot Print Properly through Wireless communication

The following are the causes of the trouble may occur when printing through infrared
communication. For the trouble when printing through Bluetooth communication, refer
to the Bluetooth User's Guide .
Possible Cause
The installation place, distance, and/or angle
is improper
During infrared communication, infrared rays
were interrupted or another infrared
communication device is operating nearby
The requirements for infrared communications
with the mobile phone are not satisfied
68
Check the installation place, distance, or angle.
See "Performing Infrared Communication" on page 40.
If infrared communication between the infrared ports of the printer and
the mobile phone is interrupted by any obstacle for ten and several seconds or
longer during printing, the paper on which data is being printed is ejected and
the printer is reset. Remove the obstacle and retry printing.
If an infrared communication device is operating nearby, interference can occur
and fail in printing the document to the end. While printing a document through
infrared communication, do not operate another infrared communication device,
such as a remote controller of a TV, nearby.
Use the mobile phone or PDA, which has an IrDA port compatible with the image
data transfer using the infrared communication.
Try This