Inserting The Battery Pack And Your Memory Card - Canon PowerShot G1 X Mark III Camera User Manual

Inserting the Battery Pack and Your Memory
Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a memory card that is new or has been formatted
in another device, you should format the memory card with this camera
( = 171).
1
Open the cover.
Slide the switch (1) and open the cover
z
(2).
( 1 )
( 2 )
2
Insert the battery pack.
Holding the battery pack with the
z
terminals in the position shown (1), hold
the battery lock toward (2) and insert
( 2 )
( 1 )
the battery pack toward (3) until the lock
clicks shut.
If you insert the battery pack facing the
( 3 ) z
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
3
Check your card's write-protect
( 1 )
switch and insert the memory card.
Recording is not possible on memory
z
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
( 2 ) Insert the memory card with the label (2)
z
facing as shown until it clicks into place.
Make sure the memory card is facing the
z
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
Lower the cover (1) and hold it down as
z
( 2 )
you slide the switch, until it clicks into the
closed position (2).
( 1 )
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
20