Setting The Date And Time - Canon EOS 20D Instruction Manual

Setting the Date and Time
Set the date and time as shown below.
_'_I Select [Date/Time].
_ Turn the <G> dial to select [_'T Date/
Time], then press <_>.
#_ The date/time screen will appear.
'_>_, Set the date and time.
_ Turn the <G> dial to select the digit,
then press <_>.
_ The selection will then shift to the
next item.
Set the date display format.
_ Turn the <_> dial to set the date
format to [mm/dd/yy], [dd/mm/yy], or
[yy/mm/dd].
4_ Press <_>.
#_ The date and time will be set and the
menu will reappear.
0
Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure YOU set the date and time correctly.
34