Table of Contents
Advertisement
6. OPTIONS AND PERIPHERAL EQUIPMENT
6.1 MR Configurator2
MR Configurator2 (SW1DNC-MRC2-_) uses the communication function of the servo amplifier to perform
parameter setting changes, graph display, test operation, etc. on a personal computer.
6.1.1 Specifications
Item
Project
Parameter
Monitor
Diagnosis
Test operation
Adjustment
Others
Note. Do not use it in the pressure control mode.
POINT
MR Configurator2 with software version 1.37P or later is supported by the MR-
J4-(DU)_B_-LL servo amplifiers.
Items not mentioned in this section are the same as those for MR-J4-_B_ servo
amplifier. Refer to section 11.7 of "MR-J4-_B_(-RJ) Servo Amplifier Instruction
Manual".
Create/read/save/delete project, system setting, and print
Parameter setting
Display all, I/O monitor, graph, and ABS data display
Alarm display, alarm onset data, drive recorder, no motor rotation (Note), system configuration,
life diagnosis, machine diagnosis (Note)
Jog operation, positioning operation, motor-less operation (Note), DO forced output, program
operation, and test mode information
One-touch tuning, tuning, and machine analyzer
Servo assistant, update parameter setting range, machine unit conversion setting, help display
Description
6 - 2
Advertisement
Table of Contents
