Table of Contents
Advertisement
2.
Remove the seven Phillips M2.5 × 5.0 screws (1) that secure the display assembly to the computer.
3.
Open the computer (2), and separate it from the display (3).
4.
Slide the hinge cover to the right, and then remove it from the display.
NOTE:
When installing the hinge cover, align the cover with the marks, press onto the bezel, and then
slide the cover left until it clicks into place.
The hinge cover is available in the Hinge Kit as spare part number N00687-001.
Display assembly
43
Advertisement
Table of Contents
