HP ProBook Fortis G10 Maintenance And Service Manual page 47

Heat sink (see Heat sink on page
●
Remove the system board:
1. Disconnect the following cables from the system board:
USB/audio board cable (ZIF) (1)
●
Display cable (ZIF) (2)
●
Speaker cable (3)
●
Power connector cable (4)
●
Touchpad cable (ZIF) (5)
●
Keyboard cable (reverse ZIF) (6)
●
RTC battery cable (7)
●
2. Remove the five Phillips M2.0 × 4.0 screws (1) that secure the system board and USB bracket to the
computer. Four screws secure the USB bracket.
3. Remove the USB bracket (2).
4. Remove the six Phillips M2.5 × 3.0 screws (3) that secure the system board to the computer.
37)
System board 41