2.
Pull the drive away from the socket to remove it (2).
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
RTC battery
To remove the RTC battery, use this procedure and illustration.
Table 5-5
RTC battery description and part number
Description
RTC battery
Before removing the RTC battery, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the RTC battery:
1.
Disconnect the battery cable from the system board (1).
2.
Remove the tape that secures the cable to the computer (2).
Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
28).
Spare part number
L43797-001
28).
RTC battery
33