Removal and Replacement Procedures— Microtower Type 2 Chassis
6.8 Front USB Device
1. Prepare the computer for disassembly
2. Remove the right access panel
3. Remove the front bezel
4. Disconnect the front USB cable from the system board.
5. Remove the single screw that secures the front USB device to the chassis
USB housing up to release it from the chassis 2.
6–14
(Section 6.1, "Preparation for
(Section 6.2, "Access
(Section 6.3, "Front
Bezel").
336493-004
Disassembly").
Panel").
, then slide the
1
Service Reference Guide, d200