6.15.2 Type 2 Battery Holder
1. To release the battery from the holder, push the retaining clip that holds the battery in place
1.
2. Lift the battery out of its holder 2.
3. Slide the replacement battery into position. The battery holder automatically secures the
battery in the proper position.
4. Replace the computer cover or access panel.
5. Plug in the computer and turn on power to the computer.
6. Reset the date and time, your passwords, and any special system setups, using Computer
Setup.
Service Reference Guide, d200
Removal and Replacement Procedures— Microtower Type 2 Chassis
336493-004
6–25