Computer Setup Menu - HP Compaq d220 MT Reference Manual

Setup Utilities and Diagnostics Features

2.2.2 Computer Setup Menu

.
Heading Option
System None
Information
CPU/Memory
information (d220
d228, and d230
models only)
CPU/Memory
information (d240
and d248 models
only)
DMI information
(d240 and d248
models only)
Standard System time
CMOS Setup (hh/mm/ss)
System date
(mm/dd/yyyy)
Floppy drive A
Primary IDE
Master
Primary IDE Slave
Secondary IDE
Master
Secondary IDE
Slave
Advanced Boot Device
CMOS Setup Priority
Try Other Boot
Devices
POST Delay Time
(seconds)
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
2–4
Lists product name, chassis serial number (d220, d228, and
d230 only), Chipset type, BIOS version, BIOS release date,
and MAC Address (d240 and d248 only).
CPU speed, CPU ID, L1 and L2 cache size, and memory
information.
CPU type and speed, FSB speed, L1 and L2 cache size, Ratio
status, DDR frequency, memory DIMM1, memory DIMM2,
memory DIMM 3, memory DIMM 4, available system memory,
legacy VGA memory
Chassis serial number, asset tag number, UUID.
Sets the system time (24 hour format).
Sets the system date.
Calculates the size and capacity of the floppy drive.
Auto detects which hard drive is the primary master drive.
Auto detects which hard drive is the primary slave drive
Auto detects which hard drive is the secondary master drive.
Auto detects which hard drive is the secondary slave drive.
Specifies the boot order for all devices.
Set this option to YES to instruct the BIOS to boot from other
bootable devices not specified under "Boot Device Priority."
Sets the amount of time before the Setup Utility prompt
(F10=Setup) appears when the computer boots.
• None: POST delay time disable (default)
• 5: POST delay of 5 seconds
• 15: POST delay of 15 seconds
• 25: POST delay of 25 seconds
• 35: POST delay of 35 seconds
336493-004
Description
Service Reference Guide, d200