HP Compaq d220 MT Reference Manual page 17

Heading Option
Peripheral OnBoard Parallel
Setup Port
(Continued)
Parallel Port Mode
(d240 and d248
models only)
Hardware CPU Ratio
Monitor Selection
CPU Warning
Temperature
CPU Shutdown
Temperature
System Warning
Temperature
System Shutdown
Temperature
CPU Temperature
System
Temperature
CPU FAN Speed
Chassis FAN
Speed
CPU VID
Vccp
+1.5V
+2.5V
+3.3V
+5.0V
+12.0V
HVcc (+3.3VSB)
Password Change
Option Supervisor
Password
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
Service Reference Guide, d200
Sets the OnBoard Parallel Port settings.
• Auto (default)
• Disable
• 378
• 278
Allows you to set the Parallel Port mode.
• SPP (Bi-Dir)
• SPP and EPP-1.9
• ECP
• ECP and EPP-1.9 (default)
Allows you to setup the CPU Multiplier Ratio for unlocked Intel
P4 & Celeron processors.
Warns when CPU temperature is greater than 85°C/185°F.
System will shutdown when CPU temperature is greater than
90°C/194°F.
Warns when system temperature is greater than 60°C/140°F.
System will shutdown when system temperature is greater than
65°C/149°F.
Detects current CPU temperature.
Detects current system temperature.
Detects CPU fan speed.
Detects current chassis fan speed.
Detects current CPU voltage.
Detects current Vccp voltage.
Detects current ATX power +1.5V.
Detects current ATX power +2.5V.
Detects current ATX power +3.3V.
Detects current ATX power +5.0V.
Detects current ATX power +12.0V.
Detects current HVcc voltage (d240, d248 only).
Allows you to set and change the supervisor password.
336493-004
Setup Utilities and Diagnostics Features
Description
2–7