Getting Started; Components And Features; Turning Power On/Off; Turning The System On - Alpine INE-W970HD Owner's Manual

Getting Started

Components and Features

INE-W970HD
⑦
①
②
③
④
⑤
⑥
Sound Settings or Eject button
〇①〇
Displays the Tone/Fader/Balance settings screen.
Press and hold this button to eject Disc.
〇②〇 VOICE button
Depending on the connected smartphone, press to call Siri
function or voice recognition mode.
NAV button
〇③〇
From an Audio system screen, press this button to recall the the
last screen of the Navigation System.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to
Go Home route screen. (If Home is not set yet, it will change to
the Home setting screen.)
For details of navigation operations, refer to "Navigation System
OM (Owner's Manual)".
Recalls the connected smartphone's map screen.
Depending on the smartphone, this function may not be available.
ALL MENUS or (Power Off) button
〇④〇
Recalls the All Menus screen.
Press and hold this button for at least 2 seconds to turn the power off.
(AUDIO) or
〇⑤〇
Displays the Audio/Visual screen.
When pressed and held, mutes the volume.
〇⑥〇 + / − button
Press to adjust the volume.
〇⑦〇 Remote Sensor
Point the remote control transmitter towards the remote sensor
within a range of 2 meters.
〇⑧〇 Disc insert slot
Inserts/ejects discs
〇⑨〇 RESET switch
The system of this unit is reset.
12
-EN
⑧
(MUTE) button
About the button descriptions used in this Owner's
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. MENU). The buttons found on the touch-screen display
are shown in bold within brackets, [ ] (e.g. [×]).

Turning Power On/Off

⑨
Some of this unit's functions cannot be performed while the vehicle
is in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example,
if the unit is in radio mode when ignition is turned off, it will
remain in radio mode when ignition is turned back on.
2
Press and hold the ALL MENUS/(Power Off)
button for more than 2 seconds to turn the power off.
• The unit can be turned on by pressing any button.
• The unit is a precision device. Careful handling of the unit
should provide you with years of trouble-free operation.

Turning the System On

With the Alpine system, the home screen is displayed automatically
when the ignition key is turned to ACC or ON.
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 3 languages.
• Some of this unit's functions cannot be performed while the vehicle
is in motion. Be sure to stop your vehicle in a safe location and
apply the parking brake before attempting these operations.