Getting Started; Accessory List; Turning Power On And Off; Demonstration Function - Alpine CDE-163EBT Owner's Manual

Getting Started

 CDE-163EBT
Rotary encoder
/SOURCE

/ENTER
/SETUP
e
/
 UTE-62EBT
Rotary encoder
/SOURCE

/ENTER
AUDIO/SETUP
e
/
Note
• The buttons on this Owner's Manual use CDE-163EBT as an example.

Accessory List

• Head Unit ..................................................................................1
• Power Cable ..............................................................................1
• Microphone ..............................................................................1
• Mounting Sleeve ......................................................................1
• Carrying Case............................................................................1
• Bracket Key ...............................................................................2
• Screw (M5 × 8) ..........................................................................4
• Owner's Manual..................................................................1 set

Turning Power On and Off

Press t to turn on the unit.
Note
• The unit can be turned on by pressing any other button except 
e (Release).
* Only for CDE-163EBT.
Press and hold t for at least 2 seconds to turn off the
unit.
Note
• The first time power is turned on, the volume will start from level 0.

Demonstration Function

This unit will enter a demonstration mode to display its various
functions. When Demo mode is set to ON, the unit starts the
demonstration if there is no operation for 30 seconds.

Turning the Demonstration mode Off

/DIM.
Setting DEMO MODE to OFF (standby state
(completely closed state
* For details about standby state and completely closed state, please refer
to "Demonstration" on page 25.

Source Selection

Press VSOURCE to change the source.
TUNER  DISC
*4
 AUXILIARY
PANDORA
*1 CDE-163EBT only.
*2 Displayed only when the iPod/iPhone is connected.
*3 Displayed only when BT IN is set to ON, refer to "Setting the
Bluetooth Connection (BT IN)" on page 29.
*4 Not displayed when ALPINE APP is set to OFF, refer to "Setting
the communication mode with a Smartphone (ALPINE APP)"
on page 27.
*5 Refer to "Using the Front AUX Input Terminal" on page 22.

Detaching and Attaching the Front Panel

Detaching

Notes
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it may
result in malfunction.
*
and
*
) or QUITE OFF
*
) in Setup menu.
*1 *2
 USB AUDIO/iPod  BT AUDIO
*5
 TUNER
*3

9
-EN