Table of Contents
Advertisement
Electronically Controlled B...
6.1.4 ECB Programming
Use the LCP and display for programming ECB functional options. All programming options appear in numbered
parameters. Parameters are arranged in groups by related functions. Programming is performed by accessing the
parameters through a menu and selecting from displayed options or entering numerical values. See the drives' supporting
materials for detailed programming instructions.
Access parameters to program bypass functions in accordance with the following instructions:
1. Press [Main Menu] on the LCP to access parameter groups.
(Note that the memory function of the menu returns to the
most recently used function. Use [Back] to return to the main
menu index when necessary.)
▲
▼
2. Press [
] or [
] to scroll through parameter groups. A
dotted outline surrounds the selected group. Bypass options
are found in parameter group 31-** Bypass.
3. Press [OK] to enter the selected parameter group.
▲
▼
4. Press [
] or [
] to scroll through the parameter list.
5. Press [OK] again to enter programming mode, which allows
changing parameter options or data. Option is inverse
highlighted.
▲
▼
6. Press [
] or [
] to scroll through programmable options.
7. Press [OK] again to activate the selection or [Cancel] to
cancel.
8. For entering numeric values, press [►] or [◄] to select
▲
numeric digit, then Press [
] or [
numbers 0-9. Selected digit is inverse highlighted.
9. Press [OK] to activate the selection or [Cancel] to cancel.
10. Press [Status] to return to operational display data or [Back]
to return to parameter menu options.
Vertical Bypass/Non Bypass Panel
▼
] to scroll through digit
®
MG.13.A1.22 - VLT
is a registered Danfoss trademark
6
6
6-7
Advertisement
Table of Contents
