Table of Contents
Advertisement
Installation
Vertical Bypass/Non Bypass Panel
3
3
INPUT POWER WIRES
OUTPUT POWER WIRES
CONTROL WIRES
OUTPUT POWER WIRES
INPUT POWER WIRES
CONTROL WIRES
Bypass
Non Bypass
Figure 3.18 P5 Panel
3.4.3 Wire Size
WARNING
ELECTROCUTION AND FIRE HAZARDS WITH IMPROPERLY INSTALLED AND GROUNDED FIELD WIRING!
Improperly installed and grounded field wiring poses FIRE & ELECTROCUTION hazards. To avoid these hazards, you MUST
follow requirements for field wiring installation and grounding as described in the National Electrical Codes (NEC) and your
local/state electrical codes. All field wiring MUST be performed by qualified personnel.
Failure to follow these requirements could result in death or serious injury.
NOTE!
Make all power connections with minimum 60 or 75°C/140 or 155°F rated copper wiring for installations in North America.
®
MG.13.A1.22 - VLT
is a registered Danfoss trademark
3-19
Advertisement
Table of Contents
