Front Usb Board - HP Pavilion HDX Maintenance And Service Manual

Rear cover (see
e.
Top cover (see
f.
Remove the Bluetooth module:
Disconnect the Bluetooth module cable (1) from the system board.
1.
Remove the two silver Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the
2.
computer.
Remove the Bluetooth module (3) from the base enclosure.
3.
Reverse this procedure to install the Bluetooth module.

Front USB board

Description
Front USB board
Before removing the front USB board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Hinge cover (see
d.
64 Chapter 4 Removal and replacement procedures
Rear cover on page 53)
Top cover on page 55)
Battery on page 36).
Hard drive on page 42)
Optical drive on page
Keyboard on page 50)
Hinge cover on page
49)
52)
Spare part number
452314-001