Video Board Heat Sink - HP Pavilion HDX Maintenance And Service Manual

Lift the processor (2) straight up and remove it.
2.
NOTE:
on the processor slot when you install the processor.
Reverse this procedure to install the processor.

Video board heat sink

Description
Video board heat sink (includes replacement thermal material)
Before removing the video board heat sink, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Hinge cover (see
d.
Rear cover (see
e.
Top cover (see
f.
Subwoofer (see
g.
System board (see
h.
The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Hinge cover on page
Rear cover on page
Top cover on page
Subwoofer on page
System board on page
36).
42)
49)
50)
52)
53)
55)
67)
70)
Component replacement procedures
Spare part number
448176-001
79