Front Usb Board - HP Pavilion HDX Entertainment Series Maintenance And Service Manual

Remove the Bluetooth module:
1.
2.
3.
Reverse this procedure to install the Bluetooth module.

Front USB board

Description
Front USB board
Before removing the front USB board, follow these steps:
1.
2.
3.
4.
5.
64 Chapter 4 Removal and replacement procedures
Downloaded from www.Manualslib.com
Rear cover (see Rear cover on page
e.
Top cover (see Top cover on page
f.
Disconnect the Bluetooth module cable (1) from the system board.
Remove the two silver Phillips PM2.0×4.0 screws (2) that secure the Bluetooth module to the
computer.
Remove the Bluetooth module (3) from the base enclosure.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery (see Battery on page
Remove the following components:
Hard drive (see Hard drive on page
a.
Optical drive (see Optical drive on page
b.
Keyboard (see Keyboard on page
c.
Hinge cover (see Hinge cover on page
d.
manuals search engine
53)
55)
36).
42)
49)
50)
52)
Spare part number
452314-001