Table of Contents
Advertisement
Memory module
Description
1-GB memory module
2-GB memory module
4-GB memory module
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the primary hard drive cover (see
Remove the memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2.
Remove the module (2) by pulling it away from the slot at an angle.
NOTE:
memory module slot.
Reverse this procedure to install the memory module.
56
Chapter 4 Removal and replacement procedures
Battery on page
Memory modules are designed with a notch to prevent incorrect insertion into the
45).
Primary hard drive cover on page
Spare part number
598859-001
598856-001
599092-001
46).
Advertisement
Table of Contents
