Table of Contents
Advertisement
6.
Using a small Phillips screwdriver, loosen the security bracket screws on the rear of the optical
drive (1), and then remove the security bracket (2).
Reverse this procedure to reassemble and install the optical drive.
Keyboard
Description
Keyboard (includes keyboard cable)
NOTE:
For a detailed list of available keyboards, see
on page
31.
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the primary hard drive cover (see
Remove the keyboard:
1.
Remove the two Phillips PM2.5×6.5 screws (1) that secure the keyboard to the computer.
Sequential part number listing
Battery on page
45).
Primary hard drive cover on page
Spare part number
605344-xxx
46).
Component replacement procedures
59
Advertisement
Table of Contents
