ZyXEL Communications P-870HW-51a v2 User Manual page 44

Chapter 4 Status Screens
Table 4 Status Screen
LABEL
Host Name
Model
Number
MAC Address
ZyNOS
Firmware
Version
DSL Firmware
Version
WAN Information
Mode
IP Address
IP Subnet
Mask
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN
Information
ESSID
Channel
WPS
System Status
System
Uptime
Current Date/
Time
System Mode
CPU Usage
44
DESCRIPTION
This field displays the ZyXEL Device system name. It is used for identification.
Click this to go to the screen where you can change it.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to your
ZyXEL Device.
This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. Click this to go to the screen
where you can change it.
This field displays the current version of the device's DSL modem code.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the ZyXEL Device in the WAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the WAN.
This field displays the current IP address of the ZyXEL Device in the LAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN. Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
This field displays the status of WPS (Wi-Fi Protected Setup). Click this to go to
the screen where you can change it.
This field displays how long the ZyXEL Device has been running since it last
started up. The ZyXEL Device starts up when you plug it in, when you restart it
(Maintenance > Tools > Restart), or when you reset it (see
28).
This field displays the current date and time in the ZyXEL Device. You can change
this in Maintenance > System > Time Setting.
This displays whether the ZyXEL Device is functioning as a router or a bridge.
This field displays what percentage of the ZyXEL Device's processing ability is
currently used. When this percentage is close to 100%, the ZyXEL Device is
running at full load, and the throughput is not going to improve anymore. If you
want some applications to have more throughput, you should turn off other
applications (for example, using QoS; see
Section 1.6 on page
Chapter 11 on page 117).
P-870HW-51a v2 User's Guide