Using The Audio-In (Microphone) Jack; Using The Audio-Out (Headphone) Jack - HP Compaq NC6220 Hardware And Software Manual

Using the Audio-In (Microphone) Jack

The notebook is equipped with a stereo microphone jack. When
connecting a microphone to the microphone jack, use a
microphone with a 3.5-mm plug.
■
If you connect a stereo (dual-channel) microphone, stereo
sound will be recorded.
■
If you connect a monaural (single-channel) microphone,
left-channel sound will record on both channels.
■
If you connect a dynamic microphone, the recommended
sensitivity may not be achieved.
■
When an external microphone is connected to the notebook,
the notebook internal microphone is disabled.

Using the Audio-Out (Headphone) Jack

WARNING: To reduce the risk of personal injury, adjust the volume
Å
before putting on headphones or a headset.
CAUTION: To prevent possible damage to an external device, do not
Ä
plug a single sound channel (monaural) connector into the headphone
jack.
The headphone jack is also used to connect the audio function of
an audio/video device such as a television or VCR.
When you connect a device to the headphone jack:
■
Use only a 3.5-mm stereo plug.
■
For best sound quality, use 24-ohm to 32-ohm headphones.
✎
When you connect a device to the headphone jack, the internal
speakers are disabled.
Hardware and Software Guide
Multimedia
4–3