Using the Modem Cable
To connect a modem cable:
WARNING: To avoid the risk of electrical shock, fire, or damage to the
Å
equipment, do not plug a modem cable into the network jack.
1. Plug the modem cable into the RJ-11 (modem) jack 1 on the
notebook.
2. Plug the other end of the modem cable into the RJ-11
telephone wall jack 2.
For more information about using the modem or about using AT
commands and dial modifiers, refer to the Modem Command
Guidelines (Advanced Users Only) provided in English on the
Notebook Documentation CD.
Hardware and Software Guide
Modem and Networking
10–2