Modem Country Selection - HP Compaq NC6220 Hardware And Software Manual

Modem Country Selection

Viewing the Current Country Selection
To see the current country setting for your modem:
1. Select Start > Control Panel.
2. Select the Regional & Language Options icon.
3. Under Location, view your present location.
Adding New Locations When Traveling
CAUTION: To prevent losing your home country settings, do not delete
Ä
your current modem country settings. To enable modem use in other
countries while preserving your home country configuration, add a new
configuration for each location in which you will use the modem.
CAUTION: To prevent configuring your modem in a way that violates
Ä
the telecommunications regulations and laws of the country you are
visiting, select the country in which your notebook is located. In
addition, your modem may not function properly if the correct country
selection is not made.
As you travel to different countries, it is recommended that you
set the internal modem to a location setting that meets the
operating standards of the country in which you are using the
modem.
By default, the only location setting a available to your modem is
a location setting for the country in which you purchased the
notebook. As you add new location settings, they are saved by
your notebook so that you can switch among the settings at any
time. You can add multiple location settings for any country.
Hardware and Software Guide
Modem and Networking
10–4