Advanced Menu
Select
Language (or press f2)
Boot options
Device options
Hardware and Software Guide
To Do This
Change the Computer Setup language.
■
Set the number of seconds for f10 and
f12 delay.
■
Enable/disable MultiBoot, which sets
a startup sequence that can include
most bootable devices and media in
the system. For details, refer to
Appendix B, "MultiBoot."
■
Set the boot order.
■
Enable/disable multiple standard
pointing devices at startup. (To set the
notebook to support only a single,
usually nonstandard, pointing device
at startup, select Disable.)
■
Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
Computer Setup
(Continued)
13–7