Using Hotkey Commands - HP Compaq NC6220 Hardware And Software Manual

Using Hotkey Commands

Initiating Standby (fn+f3)
When the notebook is on, press the
standby. When standby is initiated, your work is saved in random
access memory (RAM), the screen is cleared, and power is
conserved. While the notebook is in standby, the standby light
and the power/standby light blink.
To exit standby, press the power button to the right or left.
The
fn+f3
function of the
Windows, can be changed. For example, the
be set to initiate hibernation instead of standby. For more
information about standby, hibernation, and changing the
function of the
Switching Displays (fn+f4)
The
fn+f4
connected to the external monitor connector or the S-Video-out
jack on the notebook. For example, if an external monitor is
connected to the notebook, pressing the
times toggles the image between the notebook display, the
external monitor display, and a simultaneous display on both the
notebook and the monitor.
Most external monitors receive video information from the
notebook using the external VGA video standard. The
hotkey can also toggle images among other devices receiving
video information from the notebook.
Hardware and Software Guide
hotkey is set at the factory to initiate standby. The
hotkey, called the "sleep button" in
fn+f3
hotkey, refer to
fn+f3
hotkey switches the image among display devices
Pointing Devices and Keyboard
hotkey to initiate
fn+f3
fn+f3
Chapter 2, "Power."
hotkey multiple
fn+f4
hotkey can
fn+f4
3–7