Inserting Or Removing A Primary Battery Pack - HP Compaq NC6220 Hardware And Software Manual

Inserting or Removing a Primary
Battery Pack
CAUTION: To prevent loss of work when removing a battery pack that
Ä
is the sole power source, initiate hibernation or turn off the notebook
before removing the battery pack. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by pressing the
power button to the left or right. Then shut down the notebook through
the operating system.
To insert a primary battery pack:
1. Turn the notebook upside down.
2. Slide the battery pack 1 into the battery bay until it is seated.
(The locking latch 2 automatically locks the battery into
place.)
Hardware and Software Guide
Power
2–19