Omron NX-PA Series User Manual page 86

3 Configuration Units
 Terminal Block
Terminal Appear
number ance
(1)
(2)
(3)
(4)
(5)
(6)
*1. For details, refer to 4-4-1 Power Supply Wiring on page 4-31.
*2. For details, refer to 4-4-2 Grounding on page 4-35.
*3. Details of the operation are given in the following table.
In operation (RUN mode).
The CPU Unit is starting (until entering the operating status that is
specified in the Startup Mode setting).
Operation stopped (PROGRAM mode).
Controller error in the major fault level occurred.
3 - 14
Name
NX-PA9001
Power sup-
Supply 100 to 240 VAC.
ply input
LG LG terminal is a noise-filtered neutral terminal to increase noise resis-
*2
tance.
GR
GR terminal is a ground terminal to prevent electrical shock.
RUN Out-
Turns ON when the CPU Unit is operating.
put
Status
Function
NX-PD7001
*1
Supply 24 VDC.
*3
Operation
ON
OFF
NX-series CPU Unit Hardware User's Manual (W535)
*1
*2