Omron NX-PA Series User Manual page 43

Term
Unit configuration
upload
user program
user-defined event
user-defined variable
variable
variable memory
NX-series CPU Unit Hardware User's Manual (W535)
The configuration information for the Units that are set on the Sysmac Studio. This
information tells what Unit models are connected to the CPU Unit and where they
are connected.
To transfer data from the Controller to the Sysmac Studio with the synchronization
operation of the Sysmac Studio.
All of the programs in one project.
One of the events in the NJ/NX-series System. These events are defined by the
user. "User-defined events" is a generic term for user-defined errors and
user-defined information.
A variable for which all of the attributes are defined by the user and can be changed
by the user.
A representation of data, such as a numeric value or character string, that is used in
a user program.
You can change the value of a variable by assigned the required value. "Variable" is
used as opposed to "constant," for which the value does not change.
A memory area that contains the present values of variables that do not have AT
specifications. It can be accessed only with variables without an AT attribute.
Description
Terminology
41