Scan Delete/Add
Allows you to include or omit each channel in the scan sequence.
1
Select your desired channel.
2
PF Button:
Press the programmed button to change the Scan Delete/Add
status of the channel.
Menu Mode:
deactivate the Scan of the channel.
•
When a channel is added to scan, Beep A (1 beep) sounds and the "
(right side) indicator appears on the display.
•
When a channel is deleted (not include in scan), Beep B (2 beeps) sounds
and the "
Scrambler/Encryption
Enables or disables Scrambler (analog) or Encryption (NXDN/ DMR) function.
•
Voice Scrambler is the function to scramble the audio signal so that the
contents of communications can be prevented from being intercepted.
•
Encryption is the function that enhances secrecy in communications on the
digital channels by encrypting voice data.
PF Button:
Press the programmed button to activate the Scrambler/Encryption.
•
Beep A (1 beep) sounds.
Press this button again to deactivate Scrambler/Encryption.
•
Beep B (2 beeps) sounds.
Menu Mode:
Select "SCRENC" and press the [ S ] button to activate/ deactivate the Scrambler/
Encryption.
•
The "
" indicator appears while Scrambler/Encryption is activated.
Refer to "SCRAMBLER (ANALOG)/ ENCRYPTION (NXDN/ DMR)" {p. 72}.
[Analog/ NXDN/ DMR]
Select "SCN D/A" and press the [ S ] button to activate/
" (right side) indicator disappears on the display.
[Analog/ NXDN/ DMR]
53
"