Manual Site Hunt
Allows you can manually move the Revert Channel to another Channel without
waiting for Site Roaming to resume.
PF Button:
On the Channel of DMR Site Roaming, press the programmed button, the Manual
Site Hunt function operates.
•
Beep A (1 beep) sounds.
Menu Mode:
Select "M SITE H" and press the [ S ] button, the Manual Site Hunt function
operates.
•
Search Mode Tone sounds and send a Wakeup message once to other
Channels registered in the same System set in DMR Site Roaming and go to
search for repeaters that can detect the synchronization signal.
•
"SEARCH" is displayed during Manual Site Hunt operation.
Medium 1 Transmit Power
Turns Medium 1 (2.5 W) Transmit Power On or Off. When using a channel
programmed with low or high power, this allows you to change the output power to
medium 1.
Menu Mode:
Select "MED1 PWR" and press the [ S ] button to change the Medium 1 Transmit
Power On or Off.
Medium 2 Transmit Power
Turns Medium 2 (4 W) Transmit Power On or Off. When using a channel
programmed with low or high power, this allows you to change the output power to
medium 2.
Menu Mode:
Select "MED2 PWR" and press the [ S ] button to change the Medium 2 Transmit
Power On or Off.
[DMR]
[Analog/ NXDN/ DMR]
[Analog/ NXDN/ DMR]
42