Kenwood NX-1200A User Manual page 29

Channel Select
Selector:
Turn the Selector to select the channel number.
Channel Up/Down
Selector:
Turn the Selector to increase/ decrease the channel number.
Channel Up/ Channel Down
PF Button:
Press the programmed button to increase/ decrease the channel number.
Channel Up (Continuous)/ Channel Down (Continuous)
[Analog/ NXDN/ DMR]
PF Button:
Hold down the programmed button to continuously increase/ decrease the
channel number.
Clear [Analog/ NXDN/ DMR]
Allows you to cancel the data (Status Message, Short Message, Remote Control
Message, Call Alert, etc.) transmission, reject an incoming call, or disconnect the
call.
PF Button:
Press the programmed button to end a call or cancel a status message
transmission.
• Beep A (1 beep) sounds.
• "CANCEL" is displayed for 1 second.
CW Message [NXDN]
Sending CW Message.
PF Button:
Press the programmed button to send the set Morse code.
[Analog/ NXDN/ DMR]
[Analog/ NXDN/ DMR]
[Analog/ NXDN/ DMR]
29