Kenwood NX-1200A User Manual page 37

Home Channel Select
Allows you to set the currently selected channel to Home Channel.
1
Select the channel to be set as Home Channel.
2 PF Button: Press and hold the programmed button to set the currently
selected channel as the Home Channel.
• Beep C (3 beeps) sounds.
Menu Mode:
selected channel as the Home Channel.
Individual [Analog/ NXDN/ DMR]
Activates Individual Call Mode.
1 PF Button:
Press the programmed button to enter Individual Call Mode
(NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
2 Press the [ <B ] and [ C> ] buttons to select a Unit ID/ name from the list that
has been programmed to your transceiver.
3 Press and hold the PTT switch to make the call.
NXDN/ DMR:
Refer to "Making Individual Calls (NXDN/ DMR)" {p. 14}.
FleetSync:
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" {p. 76}.
5-Tone:
Refer to "5-TONE SIGNALING" {p. 79}.
[Analog/ NXDN/ DMR]
Select "HOME SEL" and press the [ S ] button to set the currently
Select "IND MODE" and press the [ S ] button to enter Individual
37