Function
[Analog/ NXDN/ DMR]
Allows you to access the 2nd function programmed to a button. Programmable
buttons can be assigned Main function and 2nd function.
PF Button:
1
Press the programmed button to enter 2nd function input wait state.
•
Beep A (1 beep) sounds.
•
"FNC" is displayed.
2
Press the button which has been programmed a 2nd function to perform the
2nd Function.
Group
[Analog/ NXDN/ DMR]
Activates Group Call Mode.
1
PF Button:
Press the programmed button to enter Group Call Mode (NXDN/
DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
2
Press the [ <B ] and [ C> ] buttons to select a Group ID/ name from the list
that has been programmed to your transceiver.
3
Press and hold the PTT switch to make the call.
NXDN/ DMR:
Refer to "Making Group Calls (NXDN/ DMR)" {p. 13}.
FleetSync:
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" {p. 76}.
5-Tone:
Refer to "5-TONE SIGNALING" {p. 79}.
Select "GRP MODE" and press the [ S ] button to enter Group
34