Kenwood NX-1200A User Manual page 30

Digit 1x Up/ Digit 1x Down
In 5-tone to increment/ decrement the 5-tone selcall code by 1.
PF Button:
Press the programmed button to increase/ decrease the 5-tone selcall code by 1
with each press.
Digit 10x Up/ Digit 10x Down
In 5-tone to increment/ decrement the 5-tone selcall code by 10.
PF Button:
Press the programmed button to increase/ decrease the 5-tone selcall code by 10
with each press.
Direct Channel 1 ~ 5
Allows you to go directly to Direct Channel 1 ~ 5.
PF Button:
Press the programmed button to jump to a frequently used zone and channel.
• Beep A (1 beep) sounds.
Press this button again to return to the formerly selected channel.
• Beep B (2 beeps) sounds.
If activated by your dealer, you can set your own Direct Channels by selecting
your desired zone and channel using Direct Channel 1 ~ 5.
[Analog]
1st digit code from the right of 5-tone
selcall code
[Analog]
2nd digit code from the right of 5-tone
selcall code
[Analog/ NXDN/ DMR]
30