Kenwood NX-1200A User Manual page 32

Emergency [Analog/ NXDN/ DMR]
This is for entering Emergency Mode if the transceiver is in standby mode. If the
transceiver is in Emergency mode, it exits the emergency mode. In Emergency
Mode, the transceiver repeats transmission and reception at regular intervals.
PF Button:
Press and hold the programmed button for the time set in hold delay to enter
Emergency Mode.
• If transceiver is in Emergency Mode, press and hold this button for the time
set in Hold Delay to exit Emergency Mode.
Refer to "EMERGENCY CALLS" {p. 71}.
External Microphone Sense
Allow you to set the microphone sensitivity of the external microphone.
Menu Mode:
1 Select "EX MIC S" and press the [ S ] button.
2 Press the [ <B ] and [ C> ] buttons to select the microphone sensitivity.
• You can select from +6 dB (High sensitivity) to -20 dB (Low sensitivity) by 2
steps.
3 Press the [ S ] button to confirm and exit mode.
[Analog/ NXDN/ DMR]
32